
Belgium wastes 1.8 million tonnes of food a year: how can portion size and shelf life help?
Belgium wastes 1.8 million tonnes of food a year: how can portion size and shelf life help? A large share of that food is lost at consumer level, but the cause often lies earlier in the chain: a shelf life that is too short, a portion that does not fit, or a product that is not sold in time in the shop.
For producers of convenience food, waste is therefore not a communication issue but a process issue. How long a product stays good and in which portion it reaches the customer is largely decided on the production floor.
Where is the food lost?
According to Eurostat figures, 42.7% of Belgian food waste comes from households. The rest occurs in agriculture, processing, retail and food service. Confusion around labels also plays a role: almost 40% of Belgians do not know the difference between "best before" (a quality indication) and "use by" (a safety date). That is the finding of a Too Good To Go survey from September 2025.
In the shop, too, chilled meals are a sensitive category. In the annual monitor of Wageningen University & Research on Dutch supermarkets, losses of dairy, eggs and chilled ready-made products rose to 1.5% of volume in 2025. That product group accounts for 24.6% of all food losses in the supermarket. The researchers point to the short shelf life of these products and to the fact that demand for new recipes is hard to predict.
Every extra day of shelf life therefore gives retailers, institutional kitchens and consumers more room to sell and use a product before it is thrown away.
Shelf life is decided during the process
For pumpable products such as soup, sauce, mash or stew, shelf life depends heavily on how and when the product is heated. If a product is packed first and heated afterwards, it can no longer be recontaminated after the heat treatment. If it is heated first and then filled in an open system, there is still a moment when the product is exposed to its surroundings.
With clip-pak® from Poly-clip System, the product is filled into a film or synthetic tube and closed with a clip at both ends. Two routes are then possible:
- Cook & Chill: the product is filled hot, closed and cooled down quickly.
- Pasteurisation or sterilisation in the pack: the product is filled cold and then heated in the closed pack.
Filled cold and pasteurised in the pack, soups and sauces keep for 6 to 10 weeks at 7 °C. Sterilised in aluminium foil, that can rise to 2 years, comparable to canned food.
Which route fits best depends on the product:
- Does the mass contain pieces of vegetables, meat or pulses that must stay whole?
- Can the recipe withstand a second heating without losing flavour or structure?
- Is the product going to retail with a short cold chain, or to an institutional kitchen that orders weekly?
- What minimum shelf life does the customer require?
The portion also determines the waste
A pack that is too large leads to leftovers, one that is too small to extra packaging material. With clip-pak®, the portion size is set by the dosing and the position of the clip, not by a fixed tray or mould. The same line can therefore fill small retail portions as well as large packs for catering.
For producers, three points are particularly relevant:
- Longer shelf life: heat treatment in the closed pack prevents recontamination and extends the sales period.
- Portion to measure: a different portion size requires no new trays or moulds, only a different setting.
- Less packaging material: according to a study by Circular Analytics (Vienna, December 2025, commissioned by Poly-clip System), a clip-pak® consists of only 1 to 2% packaging and emits up to 90% less CO₂ than cans or trays. These figures depend on product and material, but they show that less waste and less packaging can go hand in hand.
What does this mean for producers?
Reducing food waste does not start with the label, but with the choice of process and packaging. A longer shelf life and a portion that suits the customer reduce the chance of a product being thrown away unused, in the shop, in the institutional kitchen and in the consumer's home.
The best first step is a test with your own recipe. Measure the shelf life after pasteurisation or sterilisation, the structure of the product after heating, the closure quality and the material consumption per portion. That will make clear which configuration delivers the most, technically and economically.
Would you like to find out how your soups, sauces or ready meals can be packed with a longer shelf life and in the right portion? SysmaTec will gladly help you, together with Poly-clip System and Viskase, to define the right clip-pak® solution for your product and volume.
Sources
- Too Good To Go: Belgen vertrouwen vaker op hun zintuigen, maar verwarring rond houdbaarheidslabels blijft
- Wageningen University & Research: Voedselverspilling supermarkten blijft op laagste niveau sinds start metingen
- Poly-clip System: Efficiently packed – soups, sauces, and convenience products in clip-pak®
- Poly-clip System: clip-pak®
- Fresh Fruit Portal: Making sustainability measurable with Poly-clip System
- SysmaTec: Convenience products